Microscope

Connect the Celestron

The Celestron Labs microscope shows up as a USB camera, so this page can read it directly: live view, capture, calibration to micrometers, and sending scans to the Captrail model. Already saving images in Celestron’s own app? Upload them here instead.

1Plug in over USB2Calibrate with the slide3Capture, measure, analyze

No microscope connected Plug in the Celestron, then press Connect.
Or upload images saved from the Celestron app.

Captured and uploaded images appear here, scored for sharpness.

01Connect

Use Chrome, Edge or Safari. Your browser will ask for camera permission.

Upload images

Camera Resolution

Not connected

02Calibrate

Capture the 0.01 mm slide at the same height and zoom you’ll use for the finger, then click two tick marks a known distance apart.

— µm / px

Distance between your two clicks (µm)

Not calibrated

03Measurements

Pick Measure in the toolbar and click across a capillary loop.

None yet

04AI analysis Experimental, not a diagnosis

Sends the selected image and calibration to Claude for analysis. Results are for a clinician to review, never a diagnosis.

Model not connected yet

Runs on /api/analyze (see api/analyze.js). Boxes and measurements are AI estimates and can be wrong.

Images stay in this browser tab and disappear when you close it. Nothing is uploaded unless you press Analyze. Get consent before imaging anyone.